Countdown timer for pedestrian and traffic control
For pedestrians, the countdown timer typically displays the number of seconds remaining for them to safely cross the road. This helps pedestrians to make informed decisions about when to start crossing and to avoid crossing the road when there is not enough time to do so safely.
KEY FEATURES
FUTURLED countdown signals indicate the time remaining until the next red or green phase and thus contribute to better orientation and less risky behaviour of pedestrians and motorists at intersections.
- Bi-colour display with red and green high flux diodes
- Optional: amber display available
- Self-learning or fixed time mode
- No additional wiring to intersection controller
- Safety switch-off if red aspect of the traffic signal head fails
- Can be easily mounted into traffic signal housings (ø 210 mm / ø 300 mm)
- Signal size 210mm 2 digits, signal size 300mm 2½ digits
- Supports signal cycles for pedestrians (red/green), vehicles (red/amber/green) as well as special cycles (e.g. green flashing)
- Displays the remaining ON-time of the red and/or green main signal
- Adjustable display brightness
- optional: on-site configuration
Technical details
- Diameter Ø 300 mm
- Material UV-stabilized polycarbonate
- Dimensions (diameter x depth) 300 mm x 109 mm
- Colours according to colour specification of EN12368
- Character Height 7.5inch
- Countdown time (max.) 199 sec.
- LED High Flux LEDs
- Tightness IP65 acc. to EN 60598
- Ambient temperature range Class A, B, C acc. to EN12368
- Voltage 230VAC +10%, -15%, 50 Hz
- Wattage approx. 22W, if all LEDs illuminate with 100% brightness
- Operation Modes Automatic mode: The duration of the time interval is automatically detected during the first three cycles, once the signal has been switched on. During these learning cycles the LED display will be unlit.
- Fixed mode: A fixed time interval is set by the signal operator
RELATED PRODUCTS
Solving problems since 2008
We Provide The Best Traffic Management Services Across Pakistan